Webinar: Telops’ Infrared Cameras Calibration

28 Jun 2018 11:00 AM – 12:00 PM EDT Online  —  Want to learn more about Infrared Cameras Calibration? Join Telops for their free 30-minute webinar! Alexandrine Huot, their Field Application Scientist, will show you how the Telops’ Calibration is

Axetris, NEW Infrared Sources

Qualification tests for the EMIRS50 TO-46 packaged IR Source Online —  More than 1200 test specimen were examined. The EMIRS50 qualification plan was derived from the AEC-Q101 standard and supplemented with requirements from the IEC 60601-1 norm. After the recommended

Understanding Leadership in Energy and Environmental Design Version Four

To understand LEED Version Four and what it means for building projects, we first need to understand the purpose and process of Building Enclosure Commissioning. Building Enclosure Commissioning (sometimes referred to as Building Envelope Commissioning) is the quality-focused process of evaluating the energy performance of a facility while ensuring minimal air leakage and preventing water leakage through the building facade. This evaluation assesses and verifies facilities against defined criteria. The process runs throughout the construction, design, and then throughout the lifetime of a facility. Typical evaluations include heat flow, air flow, noise, moisture and much more.

Going Green

Building Enclosure Commissioning is just the beginning for those who want to build healthy, sustainable, and energy-efficient structures. The United States Green Building Council (USGBC) is responsible for encouraging and verifying green building practices. To guide green building practices, the USGBC uses Leadership in Energy and Environmental Design or LEED. This is the most widely used green building rating system in the world. LEED is the framework for creating healthy, efficient, and cost-saving buildings. So why go through the extra process of LEED certification? Green buildings verified by LEED minimize air leakage (ASTM E779 and E783 testing), reduce water leak occurrences (AAMA 501.2, AAMA 502, AAMA 503 and ASTM E1105 testing) save energy, water, resources, generate less waste, and support health just to name a few of the benefits.

LEED Version Four

As technology and green initiatives develop, LEED updates the criteria and process to make green spaces even more efficient and healthy. The LEED Version Four outlines changes to help guide project leaders to LEED certification. The release of LEED Version Four outlines specific changes made to streamline LEED certification.

  1. More Flexibility

LEED Version Four introduces more flexibility with strategies to fit the unique aspects of every project.

  1. Performance-based

Version Four puts the focus on performance. This calls for a performance-based approach to design, operation, and maintenance throughout the project life cycle.

  1. Smart Grid

This change rewards projects for smart-grid planning and participating in response programs.

  1. Materials and Resources

The new version goes deep into the materials used in building projects and how that affects health and the environment.

  1. Water

Water efficiency is at the forefront of LEED Version Four. This guideline takes a comprehensive approach to evaluating water usage.

  1. Documentation

To help minimize confusion, LEED Version Four streamlines documentation for more concise rating systems.

These are just a few of the changes under LEED Version Four. To get a full picture, go to USGB’s website for the user guide.

Building Envelope Commissioning and LEED

The Building Envelope Commission was introduced in LEED Version Four to ensure energy usage matches the prediction of use. The commission also verifies the optimization of enclosure performance and coordination with other systems to increase building efficiency. To qualify for LEED Version Four accreditation, buildings and facilities must undergo building envelope testing as outlined by the Building Envelope Commission. At TSI Energy Solutions, we are qualified to provide the required building envelope testing related to air leakage and water leakage (AAMA 501.2, AAMA 502, AAMA 503, ASTM E1105, ASTM E783, ASTM E1186, ASTM E783, ASTM E2128 and more). Our testing will ensure the building does not suffer from costly air leakage and detrimental building envelope water leakage. Meeting all these requirements can prove difficult for building projects, so when you begin planning a new facility or remodel, let our professionals help guide you through the necessary testing to create a more efficient, sustainable and valuable building.

The post Understanding Leadership in Energy and Environmental Design Version Four appeared first on TSI Energy Solutions.

Largest Infrared Collimator Has 6 Meter Fl

HGH Infrared Systems IRCOL600/6000 Igny, France — (PRWeb) — HGH Infrared Systems presents IRCOL600/6000, the largest collimator ever built to test very long focal length visible and IR cameras. The French company developed and manufactured this collimator, which integrates high-quality

Black Diamond 6™ (BD6™) Infrared Lenses With Enhanced Capabilities

Also Drives Costs Lower as Announced by LightPath Technologies ORLANDO, FL, USA — / ACCESSWIRE / — LightPath Technologies, Inc., a leading manufacturer of proprietary optical and infrared components and high-level assemblies, announced today its comprehensive production capabilities and global

Teledyne Awarded Contract for Infrared Space Flight Focal Plane Assembly

WFIRST gets 300 x more pixels than Hubble Space Telescope! THOUSAND OAKS, CA, USA – Teledyne Technologies Incorporated has announced that NASA has awarded a contract to Teledyne Scientific & Imaging, LLC, of Camarillo, California, for the Short Wave Infra-Red

Thermal cameras used to study the electrocalorific effect’

Today’s refrigerator devices make use of coolants that turn into gases. Although these coolants form the basis of an effective cooling process, they may be harmful to the environment. But what if we could use solid materials instead of fluids

Thermal Imager Enables Safe High Temperature Measurements

Meer, Belgium —  The FLIR GF309 is a thermal imaging camera from FLIR Systems designed to enable  high temperature measurements in industrial furnaces, chemical heaters, and coal-fired boilers, without the need to shut down the operation. This portable FLIR GF309 camera

SPYNEL’s ”Automatic Tracking in Staring Mode” Feature

See it at Eurosatory this week PARIS — (PRWEB) — HGH Infrared Systems is exhibiting at Eurosatory this week, the leading International Land and Airland Defence and Security and will launch another innovation for their 360° thermal sensors SPYNEL: the

“Drones’ role in agriculture increasing”

NIR & Visible Camera Imaging “Dwayne Reed has a hard time imagining his job as an agricultural consultant without the use of a cellphone and drone.” ‘It’s all about plant health,’ Reed said. ‘Plants reflect and absorb light. Cameras measure